Founded in 1958, Nan Ya Plastics Corporation (Nan Ya Plastics Corp. or Nan Ya), one of the largest suppliers and the most productive manufacturers in the plastic pipes industry (PVC pipes market), encompasses four types of products— Plastic Processing, Plastic Raw Material, Electronic Material, and Polyester Fiber. Besides, advocated by two great founders— Wang, Yung-Ching and Wang, Yung-Tsai, the spirit of “Industrious and Simple, Infinite and Perfect, Sustainable Operation, Social Contribution,” is absolutely the best route to be followed by Nan Ya. Thus, based on the great success of business, Nan Ya has been involved with public welfares such as college education, medical service, and care for the vulnerable, and it has been dedicated to constant improvements for public welfares such as scale expansion and quality enhancement in order to take the full responsibility of being a corporate citizen.
Since the Chiayi Plant (plastic pipe factory) was established in 1980, Nan Ya Plastics Corporation has been thoroughly maintaining and upgrading its equipment to guarantee personnel safety and product quality. In addition, both the mixing process of raw materials and the extrusion process were brought into the automatic monitoring system to ensure stable product quality during the manufacturing process, and production information can be well centralized by the programmable controller. Last, Nan Ya has been striving to research, develop, and boost product quality via big data analytics.
In early 1980s where the pipe plant was established, its monthly capacity was 5,500 tons. However, following market expansion and equipment improvements, the pipe formula replaced lead with tin in 1995, so the monthly capacity increased dramatically to 19,042 tons in 1997. Apart from increasing monthly capacity, the market share in Taiwan concerning Nan Ya plastic pipes had reached 62% at that time. Furthermore, Nan Ya had been developing special pipes for diverse applications. Take three new products for examples, some of which are ASTM UPVC pipes, which are applicable to electronics factories; heat resistant CPVC pipes, which are suitable for hot springs and high temperature thermal fluids; impact resistant pipes, which are used in earthquake-stricken areas in Taiwan. Starting from 2016, Nan Ya begun to set up the Cyber-Physical System (CPS); then, the laboratory of plastic pipes was certified by TAF National Laboratory Accreditation in 2017. Finally, based on Industry 4.0, Nan Ya has successfully established the smart factory, being dedicated to enhancing its capacity and Research & Development of plastic pipes. More importantly, Nan Ya has strong confidence of providing customers with the highest-quality products and top-notch services.
EQUIPMENT WAS SET UP FOR CPVC PIPE AND PVC FOAM CORE PIPE.
SPECIAL PIPES INCLUDING UPVC PIPE, CPVC PIPE, HIGH-IMPACT PVC PIPE, PE PIPE, AND PVC-DWV PIPE WERE DEVELOPED.
PVC PIPE FORMULA FOR TAP WATER REPLACED LEAD WITH TIN.
In 1995, according to CNS Standards, the lead solubility of PVC pipe for tap water must be lower than 0.1 ppm. Thus, to fulfil social responsibility, we substituted tin for lead as the PVC pipe formula no matter what the cost, and the lead solubility of PVC pipe was controlled within 0.005 ppm, which was far stricter than that of CNS Standards. Furthermore, we provided high-quality PVC pipe for tap water to people so that they could make better life. Besides, with such a decisive move, we successfully became one of the largest suppliers and the most productive manufacturers in the plastic pipes industry (PVC pipes market). Three years later, according to amended CNS Standards, the lead solubility of PVC pipe for tap water must be lower than 0.008 ppm, which satisfies quality of life in developed countries.
- 14 EQUIPMENT SET UP FOR PUDDLE INCREASED 4,490 TONS OF MONTHLY CAPACITY.
- EQUIPMENT SET UP FOR MEDIUM AND LARGE SIZE OF INJECTION MOLDING MACHINE HAD INCREASED TO 1,200 TONS OF MONTHLY CAPACITY.
NAN YA PLASTIC PIPES AND INJECTION PRODUCTS PASSED ISO 9001 QUALITY MANAGEMENT SYSTEMS.
THE INJECTION PLANT WAS ESTABLISHED IN CHIAYI FIRST PLANT; THEN, INECTION MOLDING MACHINES WERE INTRODUCED FROM RENWU FIRST PLANT; LAST, THE AUTOMATED WAREHOUSE WAS SET UP.
THE PLASTIC PIPE FACTORY (CHIAYI FIRST PLANT) WAS ESTABLISHED; THEN, EXTRUDERS WERE INTRODUCED FROM MING CHI PLANT AND RENWU FIRST PLANT; LAST, THE MONTHLY CAPACITY WAS 5,500 TONS.
Taipei City
No.201, Dunhua N. Rd., Songshan Dist.
Wu Hu
Plastics Corporation 1
Anhui Province
No.48, Gangwan Rd., Jingjikaifaqu, Wuhu
1
Shandong Province
No.251, Dongcheng East 2nd Rd., Dongying City